KINETIK

WHY WE CHOP THE TAIL OFF AN 8:1 AIRFOIL

A full 8:1 teardrop foil slices straight air cleanly, but adds 210 grams of dead trailing-edge carbon, violates UCI box dimensions, and acts like a weathercock when a crosswind gusts off Table Bay. By truncating the trailing chord at 38% length with crisp 0.8 mm corner radii, the air forms a virtual trailing cone of its own—matching an 8:1 foil’s drag at 62% of the mass and twice the lateral stiffness.

Macro view of matte black carbon drop handlebars and head tube
Standard 44 mm Round Tube (14° Yaw) Wide low-pressure eddy wake Kinetik Truncated NACA-Kamm Tube (14° Yaw) Virtual tail closes cleanly (-38% wake)

THREE CARBON GRADES, ZERO FILLER GLASS

Mass-market frames pad head tubes and dropouts with low-grade fiberglass scrim to survive sloppy bladder molding. Every R-01 chassis comprises 314 laser-cut unidirectional plies stored at -18 °C until layup morning.

Minimalist white studio aero frame profile
Pre-preg fiber Tensile modulus Ply orientation Structural assignment
Torayca T1100G 324 GPa · 7,000 MPa ±45° / 0° Fork crown, head-tube bearing seats, down-tube rock-strike belly.
Torayca M40J 377 GPa ultra-high 0° axial straps T47 bottom bracket shell, drive-side chainstay, steerer torque ribs.
Torayca T800S 294 GPa high-strain ±30° compliant Upper seatmast leaf and dropped seatstays for road buzz damping.

FIVE-STAGE SOLID MANDREL CURE

  1. 01

    CNC Silicone Core Casting

    Instead of cheap inflatable nylon bags that leave resin puddles inside corners, we cast reusable thermal-expansion silicone cores matched to 0.05 mm of your custom tube miter.

  2. 02

    Cleanroom Laser Ply Kitting

    314 individual pre-preg patches are cut on a vacuum table and hand-indexed under laser crosshairs in our 20 °C humidity-locked room.

  3. 03

    6.5-Bar Steel Tool Autoclave

    As temperature ramps to 138 °C, the internal silicone expands outward against hardened P20 steel clamshells, squeezing void content below 0.3%.

  4. 04

    Ultrasonic Phased-Array Scan

    Every cured frame is immersed and scanned across 18 high-stress junctions. Any wall thickness deviation beyond 0.12 mm rejects the chassis before paint.

  5. 05

    18-Gram UV Vapour Coat

    Standard multi-coat white paint adds up to 140 grams. Our standard raw carbon UV seal weighs 18 grams total and reveals every continuous fiber seam.